ARCHIVE
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Blog


Brass fittings from Gnali Bocia Brass fittings from Gnali Bocia
Brass is an alloy of Zinc and Copper, frequently used for fittings destined for the hydraulic industry. Products designed and marketed by Gnali Bocia include both components for LPG and other gases, and components for use with incompressible fluids. The exclusive feature of Brass fittings lies [...]
30/10/2013

Shut-off valves prevent the risk of cavitation Shut-off valves prevent the risk of cavitation
In the sectors using valves, critical situations very often occur that can damage the valves, at time very seriously. One of these conditions is called cavitation. This is responsible for the formation of air bubbles inside the valves, which then implode producing a characteristic noise. The [...]
23/10/2013

Thermostats for hydraulic sysyems Thermostats for hydraulic sysyems
One of the devices of thermoregulation and temperature control is the thermostat, often used to avoid over-heating of the electric resistance inside the water heating system, causing damage within the structure. Generally thermostats possess a mechanical or electronic device which aims to [...]
16/10/2013

High and low pressure regulators designed by Gnali Bocia High and low pressure regulators designed by Gnali Bocia
Pressure tanks that work containing fluid have to remain in certain working conditions that include given temperature and pressure conditions. The passage through which the fluid passes from a pressured tank placed at the beginning(a monte) and another pressured tank placed at the end(a valle) [...]
09/10/2013

Materials used to produce air vent valves		Materials used to produce air vent valves
One of the requirements noticed in the systems that use air as a flux is the need to evacuate the excess load of air to guarantee the flow within the primary work circuits. This is the main aim of air vent valves. The opening mechanism of the valve is guaranteed by the stainless steel spring, [...]
02/10/2013

I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.