ARCHIVE
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Blog


Thread requirements on water manifolds	Thread requirements on water manifolds
To guarantee uniformity among products from different manufacturers, Gnali Bocia adopts a series of standards that define, as well as the essential safety and environment requirements, also the dimensions and tolerances required. One category that envisages the use of standards is that of [...]
27/11/2013

Gas outflow from high pressure reducers Gas outflow from high pressure reducers
High pressure reducers are made of brass, offering high resistance and sealing efficiency in consideration of the maximum pressures acting inside this component. Brass guarantees optimal load resistance in high pressure reducers and in combination with safety systems for the release of excess [...]
20/11/2013

The UNI-CIG 7129 standard and flexible water tubes	The UNI-CIG 7129 standard and flexible water tubes
In domestic and industrial applications, when two or more systems need to be connected in series to operate with water or other fluids, special flexible tubes are used, designed to be used in a wide range of operating conditions. To enable the marketing of these tubes worldwide, Gnali Bocia has [...]
13/11/2013

Pressure management in mini control units	Pressure management in mini control units
LPG systems are now used on a great number of ‘green’ cars, as they fuel the engine throughout journeys, reducing CO2 emissions and other gases generated from combustion of petrol. In order to manage the LPG system, a number of primary and secondary components are used, designed to [...]
06/11/2013

I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.