ARCHIVE
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Blog


Threaded brass fittings, a fundamental range in installations  Threaded brass fittings, a fundamental range in installations
Threaded brass fittings are a necessary component in the realization of a domestic or industrial plant that is capable of acting as conduit for water and non-corrosive fluids or for gas. In order to reduce the impact in any event corrosive of water, they may also be supplied superficially [...]
26/11/2015

Check valves in order to prevent energy dispersions Check valves in order to prevent energy dispersions
The function of the check valve is to prevent hot fluid from reversing towards the supply pipe; in hot water heaters it is important, inasmuch as its absence would allow taps closed to heated water to flow towards the water main. In these applications, the check valve is combined with a safety [...]
19/11/2015

The versatility of use of valves with burner The versatility of use of valves with burner
In the most varied scenarios where the use of flames is requested for manufacturing operations, we may for instance think in this connection of the cleaning of moulds for the manufacturing of plastic, we discover the usefulness of valves with burner which, linked to a gas tank, might be used in [...]
12/11/2015

Linking more gas tanks with the tubular units Linking more gas tanks with the tubular units
You have no problems of space? If so, in order to link more than one tank to your gas distribution plant you can use tubular units, which enable the simultaneous installation of up to 4 tanks on the same line. Every tank has its stopcock that is needed for insulation and for replacing the [...]
05/11/2015

I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.