ARCHIVE
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Blog


Electrical resistances for water heating Electrical resistances for water heating
We find electrical resistances for heating the system fluid both in domestic and industrial systems, be they part of pressurised circuits or free. They are produced by inserting a filament inside a copper tube, when this is crossed by the current it produces heat. This is separated from the [...]
25/12/2014

Fail-safe aspects of the fuel shut-off valve Fail-safe aspects of the fuel shut-off valve
When we talk of system safety, we immediately think of a fail-safe device such as the fuel shut-off valve which interrupts the fuel flow to the boiler when a higher temperature than the pre-set safety one is registered on exit. Calibration of a complex mechanism such as the fuel shut-off valve [...]
18/12/2014

Stainless steel flexible tubes model FL286 Stainless steel flexible tubes model FL286
The GNALI BOCIA catalogue offers non-extensible model FL286 stainless steel flexible tubes whose length of two metres maximum corresponds perfectly to the new EN14800 regulation. They are made from a corrugated pipe of austenitic stainless material which ensures the stainless steel flexible [...]
11/12/2014

Balanced pressure regulators for civil and industrial applications Balanced pressure regulators for civil and industrial applications
Regulating gas distribution pressure may be done through locally installed pressure regulators, particularly for low and small flow values. However, when the pressure and flow values are much higher we can use balanced pressure regulators. The models produced by GNALI BOCIA are spring loaded [...]
04/12/2014

I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.