ARCHIVE
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Blog


Manifolds for water heating systems and stress corrosion. Manifolds for water heating systems and stress corrosion.
To keep water heating systems safe and long lasting, it is difficult not to think about using manifolds. These very versatile articles are made from brass and, thanks to their modularity, they can satisfy the most varied project requirements. The use of manifolds for water heating systems [...]
27/04/2017

PVC flexible hoses with fabric reinforcement PVC flexible hoses with fabric reinforcement
In the specific section of our catalogue you can find PVC flexible hoses already cut to size and headed with specific fittings for connection between the gas cylinder and the relative user, or in 100 m rolls to be cut to the required length. The characteristics of these PVC flexible hoses are [...]
20/04/2017

Life cycle of reducers for water Life cycle of reducers for water
All the reducers for both water and gas made in our factory are sold to clients with a calibration and compliance certificate, after they pass bench inspections and calibration. The life cycle of these products begins from their cataloguing and the study of the most suitable process for their [...]
13/04/2017

Gas fittings: construction and sealant Gas fittings: construction and sealant
Brass is a versatile material and it is perfect for many different uses, among which for producing gas fittings. These items, which are usually indicated as generic fittings, in the majority of cases are produced starting from coarse material that is hot forged and subsequently processed by [...]
06/04/2017

I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.