ARCHIVE
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Blog


Air venting valves and accumulations in systems Air venting valves and accumulations in systems
Why should you install an air venting valve?  The main reason is to eliminate the air and gas that accumulate in some areas of the system and which can prevent the fluid from flowing correctly through it. Air pockets can appear as a result of many different causes, but the main ones are: [...]
25/05/2017

Manifolds for water and multilayer pipes Manifolds for water and multilayer pipes
One of the most appreciated solutions to distribution in hot water systems is manifolds for water, made of stamped brass and worked on cutting-edge transfer machinery. These manifolds for water can be installed quickly without having to create chased intersections if combined with fittings for [...]
18/05/2017

Electric resistors for water heaters and the problem of system corrosion Electric resistors for water heaters and the problem of system corrosion
Electric resistors for water heaters induce vagrant currents into circuits which can favour spot corrosion. This damages the system components, starting from the electric resistors and ending with the boiler walls. Sacrificial anodes of magnesium are usually installed to protect these [...]
11/05/2017

Boiler safety valves do not always leak because they are faulty Boiler safety valves do not always leak because they are faulty
Boiler safety valves are devices that protect the heating system by discharging the water, therefore the excess pressure, when it exceeds 3 bar. At times, though, boiler safety valves can drip insistently, but almost never because of production faults. There are many other possibilities, and [...]
04/05/2017

I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.