ARCHIVE
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Blog


Eliminating dissolved gases' bubbles with air vent valves Eliminating dissolved gases' bubbles with air vent valves
Once again, we return to the topic of air vent valves; a valid help to eliminate the gases dissolved in the fluid that transports heat in our implants. Studies tell us that if, at the absolute pressure of 1 bar, we increase temperature from 20 °C to 80 °C , the maximum number of litres of [...]
25/06/2015

The stress corrosion cracking (SCC) and threaded brass fittings The stress corrosion cracking (SCC) and threaded brass fittings
Applying metallurgic knowledge to the threaded brass fittings teaches us how the alloys used in the creation of these products, if not treated correctly during all phases of manufacturing and even of installation, could suffer from a phenomenon known as Stress Corrosion Cracking (SCC). GNALI [...]
18/06/2015

The versatility of GNALI BOCIA's water manifolds The versatility of GNALI BOCIA's water manifolds
Beginning with the pressing of semi-finished product of considerable dimensions, derived from CW617N brass, begins GNALI BOCIA’s production chain for water manifolds. The subsequent processes are carried out in the Lumezzane facilities, by the use of latest-generation CNC (Computer [...]
11/06/2015

Advices for a good utilization of tubular electric heaters Advices for a good utilization of tubular electric heaters
Tubular electric heaters are usually resorted to inside open or pressurized water boilers or heaters, in order to get the fluid, normally water, to heat. For the sake of a better operation, their assembly should be done in a vertical position, but, especially, always submerged by the fluid to [...]
04/06/2015

I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.