ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

High and low pressure regulators designed by Gnali Bocia

Systems that function with compressible fluids need to be able to maintain the working pressure constant and therefore use suitable pressure regulators.

Pressure tanks that work containing fluid have to remain in certain working conditions that include given temperature and pressure conditions. The passage through which the fluid passes from a pressured tank placed at the beginning(a monte) and another pressured tank placed at the end(a valle) is determined by a pressure regulator, a device entirely designed and produced in the Gnali Bocia establishments. The aim is to modify the pressure value entering the tank at the end, which will be different to the pressure regulator at the beginning.
Regulators are generally divided in two categories: low and high pressure. This brings deep changes in the structure of the devices due to the working conditions concerned.  
High pressure regulators work at a maximum pressure of 6 bar, in other words  pressure two times higher than that of the environment while low pressure regulators work with values inferior to a bar: going from 20mbar to a maximum of 200mbar.
Some pressure regulators possess a barometer that reads the difference in pressure; not all models have this extra device as for many circumstances don’t need to know the exact pressure but exclusively respect the maximum values imposed.
 

09/10/2013


See also
09/09/2018 Choosing the right pressure regulators in kit The wide range in which you can choose the pressure regulators more suitable for your needs to be included in our kits

09/04/2014 High and low pressure regulators for the hydraulics industry The pressure conditions within the hydraulic systems are managed by special components that maintain the nominal values within set parameters.

09/07/2014 Choose pressure regulators to fit your installation The range of pressure regulators in our catalog enables you to choose the most suitable model.

09/12/2014 Balanced pressure regulators for civil and industrial applications Balanced pressure regulators can be used for high flow values and quick changes

09/09/2014 The right pressure regulator model An extensive range of models for choosing the best pressure regulator for each use


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.