Hydraulic valves marketed by Gnali Bocia
Specific variants of hydraulic valves were designed for both fluids, like water, and gas, like lpg
Hydraulic valves are only one category of fittings for fluids such as water or gas and Gnali Bocia has a wide range of them in its catalog pointing to the national and international sale covering various nations in the world such as Russia.
Independently, if they are intended for incompressible or compressible flows, hydraulic valves allow the connection of multiple fittings between them and ensure safety margins designed not to cause problems in the pipes.
Indeed, some hydraulic valves operate in the automatic mode, preventing the possibility, by an operator, to make changes of minimum flow rate inside the valve. This is because provision of proper valves functioning within the correct operating range is necessary and it is important that no one tampers with hydraulic valves manually and without authorization.
As for valves used in the management systems of gel gas, the so-called counters, they usually have a tap opened and closed manually. This system is used exclusively for the purpose of simplifying the structure and allowing anyone to open and close the circuit of the gas distribution. Internally, these valves are of hollow spheres inside.
The category of the hydraulic valves includes those dedicated to vent excess air contained in the circuits through which the working fluid flows, and there are many models of these air relief valves.
Check valves, instead, work automatically and their bodies are made of brass with stainless steel internal parts.
Independently, if they are intended for incompressible or compressible flows, hydraulic valves allow the connection of multiple fittings between them and ensure safety margins designed not to cause problems in the pipes.
Indeed, some hydraulic valves operate in the automatic mode, preventing the possibility, by an operator, to make changes of minimum flow rate inside the valve. This is because provision of proper valves functioning within the correct operating range is necessary and it is important that no one tampers with hydraulic valves manually and without authorization.
As for valves used in the management systems of gel gas, the so-called counters, they usually have a tap opened and closed manually. This system is used exclusively for the purpose of simplifying the structure and allowing anyone to open and close the circuit of the gas distribution. Internally, these valves are of hollow spheres inside.
The category of the hydraulic valves includes those dedicated to vent excess air contained in the circuits through which the working fluid flows, and there are many models of these air relief valves.
Check valves, instead, work automatically and their bodies are made of brass with stainless steel internal parts.
26/06/2013
I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.