ARCHIVE
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Manifolds for sanitary installations with adjustment screw

Our manifolds for sanitary installations are made to give plenty of channels for fluid to pass through, resulting in reduced pressure drops.

In the gnali bocia catalogue you can find a wide range of manifolds for sanitary installations equipped with regulating valve. The manifolds are available in the version with 40 mm between the axes and the more compact version with 35 mm between the axes.
These manifolds for sanitary installations were designed and produced in our factory to minimise pressure drops and maximise the fluid passage channels. This was obtained by offsetting and sloping the tap screw in a suitable manner. The tap screw adjusts and closes the side offshoot.
The screw has a flat gasket made of EPDM, which guarantees long life, even at high temperatures.
The body of the manifolds for sanitary installations is made from unwrought brass that is hot-forged and heat treated to guarantee long-lasting duration against stress corrosion cracking, a common characteristic of these metals. The outside is covered in nickel, to ensure that the product resists external corrosive agents, while remaining pleasant to look at over time.

06/07/2017


See also
06/02/2016 Manifolds for sanitary installations with locking screw Moving from a forged, nickel-plated brass body, I can produce manifolds for sanitary installations.

06/09/2016 Manifolds for sanitary facilities: which model should I choose? Manifolds for sanitary facilities in different models, with or without faucet, yellow or chrome-plated, with the most suitable wheelbase.

06/10/2014 Heating manifolds with stopcock The adjustable version of heating manifolds useful for correctly balancing installations

06/04/2016 Robust, modular, compact brass manifolds Brass manifolds with a narrow wheelbase for the sake of compact installations and optimization of spaces

06/03/2013 The use of water manifolds in heating installations Water manifolds are used in homes for all heated water sorting installations


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.