ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

The main problems concerning pressure regulators

Pressure regulators are components designed to withstand difficult conditions

When considering pressure regulators, it is often thought that downstream of the component there are no risks deriving from any malfunctioning of the component itself. However, this is not completely true. In fact, the components designed by Gnali Bocia are guaranteed over time and in specific circumstances: it is well-known that a poor design or even a lack of maintenance of a component subjected to pressure loads that vary over time and poor environmental conditions that can compromise the good functioning of a component, are the cause of a possible structural failure of various parts.
The current regulations relating to pressure regulators are very strict since they are respected in addition to National, European and International specifications when selling on the global market.
When dealing with devices that manage compressible fluids, pressure regulators are tested to guarantee structural strengths much higher than the nominal ones to which they will be subjected, thus guaranteeing their duration over time. The pressure gauge is usually placed before the pressure reducer to check any values that do not correspond with those of the design.
As already highlighted however, maintenance is important for pressure regulators: periodically checking a mechanical component allows you to prevent any breaks and malfunctioning, ensuring the protection of the environment and the safety of staff is not at risk.
 

22/01/2014


See also
22/04/2014 High and low pressure regulators for the hydraulics industry The pressure conditions within the hydraulic systems are managed by special components that maintain the nominal values within set parameters.

22/10/2013 High and low pressure regulators designed by Gnali Bocia Systems that function with compressible fluids need to be able to maintain the working pressure constant and therefore use suitable pressure regulators.

22/12/2017 Industrial pressure regulators for gas High flow pressure regulators with compensated adjustment for greater precision

22/06/2020 Low pressure regulators used for LPG and gas Low-pressure regulators, present in multiple dimensions and variants, are used in maintenance and management of gas and LPG flows

22/02/2015 Pressure regulators for industrial uses Adjust the inlet pressure through the FG and FGB ranges of pressure regulators


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.