ARCHIVE
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Blog


Tubular resistors' production process Tubular resistors' production process
Starting from a brass alloy of prime quality, our factories create the basis from which the tubular resistors’ range is then created. They can guarantee a complete interchangeability with the other products present on the market. All of this is due to the use, in our factories, of latest [...]
13/08/2015

Modularity in brass manifolds' creations Modularity in brass manifolds' creations
One can easily obtain multiple extensions to an installation with the use of brass manifolds, like the ones that can be found on the GNALI BOCIA catalogue. By being modular, they allow the creation of the necessary number of connections for an agile management of a distribution system. In the [...]
06/08/2015

The safety valves designed and produced according to PED guidelines The safety valves designed and produced according to PED guidelines
All of the safety valves produced in our factories are released only if in compliance with the PED (97/23/CE) guidelines criteria, issued by the European community and that regulate the designing and construction of pressure devices. The regulation implies for the safety valves to be tested [...]
30/07/2015

Our worldwide products for thermohydraulics Our worldwide products for thermohydraulics
The company GNALI BOCIA can count on a wide range of products for thermohydraulics that are able to satisfy every need in the design and installation phases of both domestic and industrial plants. The vocation for exporting products for thermohydraulics has made it so that they could reach [...]
23/07/2015

Using water pressure regulators to save up Using water pressure regulators to save up
One of the complementary functions that the water pressure regulators perform when being inserted into implants, is the one of allowing a considerable saving of water; a great advantage for the costs that all families must be dealing with. Indeed a reduction of 6 bar from the entry to 3 bar in [...]
16/07/2015

Various models of flexible rubber tubes, compatible to all gases Various models of flexible rubber tubes, compatible to all gases
 On the GNALI BOCIA’s catalogue, we can fine the flexible rubber tubes range to be used for connecting utilities to a domestic distribution network or to fuel tanks, in the case of portable appliances. The flexible rubber tubes are manufactured with materials compatible with the gases [...]
09/07/2015

Mini control units; UNI 7131 guidelines Mini control units; UNI 7131 guidelines
For the connection of various LGP tanks destined to the fuelling of a utility implant, the UNI 7131 suggests the use of devices such as the mini control units equipped with two or three stopcocks, which allow to switch cisterns without the dispersion of gas into the environment. The document [...]
02/07/2015

Eliminating dissolved gases' bubbles with air vent valves Eliminating dissolved gases' bubbles with air vent valves
Once again, we return to the topic of air vent valves; a valid help to eliminate the gases dissolved in the fluid that transports heat in our implants. Studies tell us that if, at the absolute pressure of 1 bar, we increase temperature from 20 °C to 80 °C , the maximum number of litres of [...]
25/06/2015

The stress corrosion cracking (SCC) and threaded brass fittings The stress corrosion cracking (SCC) and threaded brass fittings
Applying metallurgic knowledge to the threaded brass fittings teaches us how the alloys used in the creation of these products, if not treated correctly during all phases of manufacturing and even of installation, could suffer from a phenomenon known as Stress Corrosion Cracking (SCC). GNALI [...]
18/06/2015

The versatility of GNALI BOCIA's water manifolds The versatility of GNALI BOCIA's water manifolds
Beginning with the pressing of semi-finished product of considerable dimensions, derived from CW617N brass, begins GNALI BOCIA’s production chain for water manifolds. The subsequent processes are carried out in the Lumezzane facilities, by the use of latest-generation CNC (Computer [...]
11/06/2015

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.