ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Flexible tubes for water, corrugated in steel

Produced in corrugated stainless steel, the flexible tubes for water comply with the UNI CIG 7129 standard

We can use all the flexible tubes for water even if specifically designed to conduct gas, but in the vast range available in the catalog, there is the FL289 specifically achieved for this objective.
These flexible tubes for water are in stainless steel, in conformity with the provisions of the UNI CIG 7129 standard, initially created for the flexible tubes dedicated to the conduction of gaseous combustibles which, however, remain usable for the conduction of fluids.
These flexible tubes for water are produced in corrugated stainless steel which enables, as according to norm, the maximum extension up to twice the length, and are equipped with extensions always in stainless steel, welded at the terminals via TIG welding which allow joints and to avoid slag due to the process.
The threaded ends are always a male and a female, with gas thread. They may be from 1/2” up to 1” in size and the maximum extension length that can be reached is 400mm.
The manufacture of the flexible tubes for water is totally performed in the Lumezzane factories.

07/09/2017


See also
07/12/2014 Stainless steel flexible tubes model FL286 Non-extensible stainless steel flexible tubes for connecting devices to the domestic network

07/02/2016 Flexible water tubes made of stainless steel Flexible water tubes, extendible and suitable for use with drinking water

07/10/2014 Marking non-extensible stainless steel flexible tubes. EN14800 legislation indicates how stainless steel flexible tubes should be marked.

07/04/2020 Flexible water hoses of stainless steel, expandable Flexible water hoses that can be extended to double their initial length, as indicated by UNI CIG 7129

07/02/2018 Stainless steel flexible pipes with plastic protective sheath Stainless steel flexible pipes meet the UNI CIG 9891 standards which provide the external protection in plastic polymer


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.