ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Gas fittings: construction and sealant

GNALI BOCIA gas fittings are made from brass and every versatile

Brass is a versatile material and it is perfect for many different uses, among which for producing gas fittings. These items, which are usually indicated as generic fittings, in the majority of cases are produced starting from coarse material that is hot forged and subsequently processed by transfer machines.
Gnali Bocia gas fittings have threaded ends, according to the EN 10266 Standard, which recently replaced ISO 7 regarding threads for gas with thread sealing surface. The female thread of the fittings is cylindrical and couples with pipes having a 1:16 conic thread. The thread is triangular with a 55° opening, and the pitch and crest are connected identically to favour sealing.
Gas fittings, however, also need a sealant to be applied between the threads, otherwise leaks can occur which, in the case of combustible material, can lead to catastrophic situations. The material used must be chosen considering its compatibility, first of all with the fluid in the system, then with the working temperature and finally according to its contact with the metal, to prevent creating dangerous corrosion.

 

06/04/2017


See also
06/06/2016 Brass fittings and their sealing In order to seal joints with brass fittings, it is necessary to choose the right sealing material that is compatible with the system fluid.

06/11/2017 anaerobic sealant for the tightness of threaded brass fittings For the tightness of threaded brass fittings, we can use special sealants as well as classic methods like teflon and hemp.

06/11/2014 Sealing hydraulic fittings Use of Teflon and sealants for sealing joints made ​​of brass hydraulic fittings

06/09/2014 The brass fittings series for general use We can use the wide range of brass fittings by Gnali Bocia for water and gas plants

06/01/2023 Hydraulic fittings and material internal stress Hydraulic fittings of brass with gas thread for sealed connections in plumbing and heating systems


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.