Gas valves with ball lock
Gas valves made in two pieces for the interception of gaseous fluids in plants.
Made with ball lock, the gas valves are supplied in different versions, both straight and angular to be used in any civil or industrial installation. The opening and closing command is carried out by means of a lever or a butterfly control, in some cases designed to avoid accidental opening and closing if not expressly desired.
The body of the gas valves is made of brass which is then chromed to give the surface resistance necessary for the product to last over the years without oxidize and above all remaining aesthetically beautiful.
The construction of the gas valves takes place in two pieces, first the closing ball is incorporated into the body and subsequently closed with a ring nut, in these two parts the housings of the sealing gaskets that surround the sphere are prevented from escaping gas and liquids . To guarantee a perfect seal even at the highest operating temperatures, these gaskets are made of PTFE.
The construction of the gas valves takes place in two pieces, first the closing ball is incorporated into the body and subsequently closed with a ring nut, in these two parts the housings of the sealing gaskets that surround the sphere are prevented from escaping gas and liquids . To guarantee a perfect seal even at the highest operating temperatures, these gaskets are made of PTFE.
12/07/2018
I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.