ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

The right temperature on the boiler thermostat for savings

The right room temperature regulated by the boiler thermostat promotes a healthy environment

The correct exploitation of the heating system is regulated by a fundamental component which is the boiler thermostat: it contributes to setting the room temperature.
Exposure to high temperature results in a too high reduction of room humidity and therefore generates breathing problems in people; a too cold environment because a boiler thermostat is set too low, leaves a sense of discomfort due to the feeling of damp.
But a good solution for well-being doesn’t only depend on the thermostat, in order to obtain optimum yield the boiler should be adjusted to the lowest temperature possible, this is because the combustion heat should not be wasted through the exhaust of the fumes into the atmosphere, fumes that remain colder. Maintenance of the system is also important although, despite legal requirements, it is often overlooked and leads to a rapid increase in consumption.
The boiler thermostat may be installed in a single point of the house, usually in the living area, so as to regulate the environment that is most used, but for large houses or those which develop over several floors it is useful to install several controllers in order to optimise the temperatures in the various areas.
Another useful detail for a correct energy saving is the use of thermostatic valves to be applied on the radiators in order to control the temperature in each individual room.
 

12/02/2015


See also
12/04/2014 The importance of thermostats in boilers The choice of a thermostat for a boiler is very important for reducing the emission of pollutants and lowering consumption.

12/09/2015 The installation maintenance and the boiler safety valve Limiting the limy deposits improves the boiler safety valve's life, as well as the one of the system.

12/01/2015 Some virtues of brass manifolds Why use brass manifolds in heating and which advantages do they have

12/09/2014 System safety with the boiler safety valve Prevent problems and damages to your system by using a boiler safety valve

12/03/2014 Home comforts with tubular heating elements Tubular heating elements have many advantages due to their versatility and usability in heating fluids for domestic use


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.