ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Water collectors with diameters of 35 mm

The 35-mm diameter makes the water collectors a valid solution in terms of compactness

Distribution of drinking water has always played an important role in our homes, and modern technology allows us to do this through water collectors made with copper and equipped with taps for the closure of each single branch. This allows for easy maintenance of the single utilities.
The 35-mm diameter of the water collector shunts is the right compromise between compactness needed in this type of installation, and the easy assembly and maneuvering during use.
Water collectors enable easy supervision when combined with multilayer tubes or flexible tubes. In the case of the multilayer tube on the catalogs, there is also a series of adaptors specifically designed to connect the collector to the distribution system.
According to system demands, the water collectors can be supplied in untreated copper, or treated superficially through nickel coating or chroming, also in accordance with specific national norms.

28/09/2017


See also
28/08/2020 Water manifolds for the home The water manifolds serve to supply water throughout the house, in turn improving hot and cold water management.

28/05/2013 Heating collectors and principles of use A combination of several heating collectors allows assemble a system of hydraulic management for residential areas

28/10/2015 The practicality of installing fittings for multilayer pipes Fittings for multilayer pipes realized in nickel-plated brass in order to improve resistance to metal corrosion

28/07/2016 Hydraulic fittings for the multilayer pipe Hydraulic fittings manufactured in brass and available in nickel-plated version as well in order to withstand corrosion

28/07/2015 Various models of flexible rubber tubes, compatible to all gases On the catalogue, you'll be able to find the right range of flexible rubber tubes among a number of various measures' hanks


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.