ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

How tubular electric resistances are manufactured

Some technical aspects of the construction of tubular electric resistances sold by GNALI BOCIA

The particular attention that GNALI BOCIA factories place in building tubular electric resistances is one of the key factors that guarantees long service life. 
The other important aspect is the right choice of materials constituting the tubular electric resistance which must resist against time and stresses due to intermittent operation. 
The starting component is the copper tube with a purity greater than 99% which is annealed in order to have a good heat deformability. The electric heating element which is the heart of tubular electric resistance and which defines the thermal power is placed inside. Remember that the items in the catalogue have power ratings ranging from 1000 to 3000 watts. 
The next step is to isolate the heater from the copper tube and this is carried out by the compacted magnesium oxide which fills all the spaces. The whole is then closed by sealing and fixing the heater tube to the flange. 
Sealing is important for a good lifespan of tubular electric resistances because it preserves the state of the insulating powder and prevents infiltration and moisture absorption, which lead to an increase in its electrical conductivity by creating a bridge between internal and external parts, thus dispersing electric current and inevitably triggering the safety switches of the household installation. 
For any information please contact us.
 

16/10/2014


See also
16/11/2018 Thermostats for tubular electric resistances Check the function of the tubular electric resistances through the bimetallic control thermostats

16/01/2016 Electric tubular heaters capable of offering better resistance to corrosion. Copper at a high purity grade in order to build electric tubular heaters suited to house kettles

16/03/2017 The importance of the specific power of electric resistances Electric resistances made of pure copper to reduce the effects of corrosion and increase duration over time.

16/12/2019 The range of tubular heating elements According to practical needs, Gnali Bocia has equipped its catalog with a decisive choice of tubular electric resistances Gnali Bocia offers a number of types of tubular electric resistances

16/11/2017 Pure copper electric resistances Top quality Italian pure copper and brass are used to produce our electric resistances.


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.