ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Thermostats for tubular electric resistances

Check the function of the tubular electric resistances through the bimetallic control thermostats

As already mentioned in other articles, the tubular electric resistances produced and marketed by GNALI BOCIA are made of pure copper, a material that ensures a long life even when used with particularly hard water. But to make these devices work properly, we must combine a thermostat that continuously regulates its operation, namely that there are no cases in which the tubular electric resistances do not start or continue to heat without stopping.
This second hypothesis is the one hat could lead to an increase in the temperature and consequently of the pressure inside the heating system creating a situation of serious danger.
But the precision and care in the realization of the thermostats to be combined with the tubular electric resistances followed by control methods developed and consolidated in an ISO 9001 quality system is able to give reliable and precise regulation systems over time.
Each device is constructed by providing housing and contacts for the probe and the electrical control system. The technology has been refined over time and is based on an extremely reliable control system, consisting of a bimetal lamina that allows closing and reopening of the contact based on temperature variations.

01/11/2018


See also
01/10/2014 How tubular electric resistances are manufactured Some technical aspects of the construction of tubular electric resistances sold by GNALI BOCIA

01/06/2015 Advices for a good utilization of tubular electric heaters Corrosion and noisiness of tubular electric heaters might be reduced through a few adjustments

01/03/2017 The importance of the specific power of electric resistances Electric resistances made of pure copper to reduce the effects of corrosion and increase duration over time.

01/02/2018 Tubular electrical resistances a safe choice The careful choice of materials makes the tubular electrical resistances safe and reliable

01/10/2013 Thermostats for hydraulic sysyems Thermostats are inserted in water heaters or boilers to regulate the temperature.


I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.