Safety valve for boiler approved in accordance with the PED directive
Safety valve for boiler made in brass on numerical control machines at the Lumezzane plants
Approved in accordance with directive 97/23/CE, also known as PED, at certified agencies and calibrated at the counter in our factories, the safety valve for boiler is an indispensable component to protect the equipment from dangerous overpressure, an event that might occur in systems with hot water heater, whichever the type of fuel.
Once installed, the safety valve for boiler will see to the task of draining the excess pressure by opening up and letting out part of the fluid in the system, thereby restoring the pressure to normal levels. These valves also serve as checks, in other words, they only open in case of actual need, thereby avoiding annoying drips.
There is also a model of safety valve for boiler equipped with a lever for the manual control of its opening, which thing enables us to completely drain the system in case of need. This function is useful for instance in holiday homes not inhabited during the cold season, thereby avoiding the danger of frost.
Once installed, the safety valve for boiler will see to the task of draining the excess pressure by opening up and letting out part of the fluid in the system, thereby restoring the pressure to normal levels. These valves also serve as checks, in other words, they only open in case of actual need, thereby avoiding annoying drips.
There is also a model of safety valve for boiler equipped with a lever for the manual control of its opening, which thing enables us to completely drain the system in case of need. This function is useful for instance in holiday homes not inhabited during the cold season, thereby avoiding the danger of frost.
Every safety valve for boiler is made in such a manner that the calibration might not be modified by the end user.
22/09/2016
I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.